Click on Photo

Product

Brand

Part Number

Tie Down Straps

LC551

Breaking point of 300 kg.


2 x 600 cm

$39.00

One Key System

544

Replace all lock cylinders on your Thule products and use the same key for all.


Remove and replace the locking cylinders in a few easy steps with the help of a special tool.


Depending on how many Thule products you have, you can choose a One Key System with 4, 6, 8 or 12 locking cylinders.


Set of 4 Locks

$39.00

Load Stops

LC503

Ensures a secure hold on your load.


9 cm high


Set of 4

$69.00

Load Stops

LC803

Four sturdy and moveable load stops for safe transportations. For use with Aero bars.

$69.00

Tie Down Straps

LC523

Breaking point of 300 kg.


2 x 400 cm

$29.00

Tie Down Straps

LC524

Breaking point of 300 kg.


2 x 275 cm

$25.00

Ladder Carrier

LC548

Fully lockable.


Holds up to three ladders firmly in place.

$99.00

Strap Winch

LC552

Strap and load stop in one.


Perfect for long high loads.


Quick and safe.

$125.00

Ratchet Tie Down

TDR

Heavy duty ratchet mechanism with 3500mm strap and metal hook.

$43.00

Lockable Knob

527

Secure your guttered Thule roofrack with footpacks 368, 369, 951 and 952 to your car with these replacement locking knobs.


Set of 4 Locking Knobs $79


Each of Locking Knobs $19.75

$79.00

Tie Down Slides

TDS

Extra tie down slides for the track mount or wagon rack.

$27.00

U-Bolt

MA3035

Fitting brackets standard bars

$20.00

U-Bolt

MA3035-88

Fitting bracket for roof baskets to Rhino commercial racks

$27.00

U-Bolt

MA3035-99

U-Bolt set for Rola, Rhino sportz

$27.50

Load Stops

LC502-1

Ensures a secure hold on your load.


25 cm high


Set of 2

$52.00

Thule Roller 815

815

Makes it easy to slide long objects, like planks or water sport crafts, onto the roof rack.


Ideal for loading objects like ladders, timber etc.


Rubber coating for protecting the objects during loading.


Makes it easier and safer to singledhandedly load kayaks or surfboards from the rear of the vehicle.


Made of strong and durable aluminium covered with soft plastic (TPE) surface.

$89.00

Tie Down Attachment

TDA

Fits around crossbar and provides an anchor point for tie down straps.

$27.00

Load Stops

LC502

Ensures a secure hold on your load.


25 cm high


Set of 4

$99.00

Locking Hitch Pin

RBCA006

The RBCA006 locking hitch pin will allow you to secure your 5/8" receiver bike rack to you vehicle reducing the risk of theft.


It is the perfect complement for the RBCA005 locking knobs.

$38.00

Cable Lock

RLLB

The RLLB is a Key locking cable lock that attaches to the Heavy Duty Bar.


Great for securing ladders and other suitable items.

$71.00

Sportz Load Holders

S602

When looking to secure your load of timber or a ladder on to Sportz bars, then the S602 is ideal.


Sold as a set of two holders, they're made from strong ultra light material.


They fit to the Rhino Sportz and Rhino Aero bar only, by sliding into the channel of the bar.


They are approx 100mm high.

$25.00

Small Ladder Peg

RSLP

The small ladder pegs are designed to be tie off points and supports when carrying a ladder.


The small pegs measure approx 75mm high and have an eye bolt style head, to allow you to tie off load straps.


It is designed to fit to Rhino commercial bars only.


They are sold as a pair.

$23.00

Medium Ladder Peg

RMLP

The medium ladder pegs are designed to be tie off points and supports when carrying a ladder / load.


The medium pegs are 130mm in height and feature an eye bolt style head to allow easy tie off of you ladder or load.


The RMLP ladder pegs are designed to fit the Rhino Heavy Duty Cross bars and are sold per pair.

$25.00

Large Ladder Peg

RLLP

The Large ladder pegs are designed to be tie off points and supports when carrying a ladder / load.


The large pegs are 210mm in height and feature an eye bolt style head to allow easy tie off of you ladder or load.


The RLLP ladder pegs are designed to fit the Rhino Heavy Duty Cross bars and are sold per pair.

$27.00

Load Holder

RLH

The Rhino Load Holder stands 125mm in height and fits the Heavy Duty Cross bar.


With multiple uses including securing loads or a ladder, this accessory always comes in handy.


Sold as a pair.

$25.00

Eye Bolt

REB

The Rhino Eye Bolt is used as a tie off point to aid in securing your load.


The REB Mounts directly to the Rhino Heavy Duty Bar and is made form galvanized steel so it wont rust.

$21.00

Sportz Easy Guide

SEG

The Sportz Easy Glide pads are a great little product that simplifies the action of loading a ladder onto your Rhino-Rack Aero or Sportz cross bars.


Made from fully weather proof materials, the SEG features a slippery surface that is great for loading and unloading ladders, pipes and planks of wood.


Designed to fit the Rhino-Rack Aero or Sportz cross bars the SEG has side supports to help guide your ladder or load.


The SEG comes with 2x pads and the hardware to attach to the Rhino-Rack Aero or sportz cross bar.

$37.00

Ladder Strap

RLS5

The RLS5 is a cam loc snap shackle with a 500mm strap that attaches to the heavy duty cross bar.


This snap shackle allows a quick fitting and securing point for your ladders.


They come as part of select double ladder rack system or can be purchased individually.

$54.00

Cable Lock

RLLBPAIR

The RLLB is a Key locking cable lock that attaches to the Heavy Duty Bar.


Great for securing ladders and other suitable items.

$126.50

Roller

RR540

The RR540 is designed to take the back breaking labour out of loading and unloading a ladder, made from alloy and supplied with a plastic cover sleave the RR540 mounts directly onto the Heavy Duty Cross bar.

$68.00

Spacer Blocks for Aero Bar

LHS-A2PAIR

The LHS-A2PAIR spacer blocks are only compatible with Aero cross bars.

$24.00

Foxwing Single Bracket Mount Fit Kit

31108

The Foxwing fitting kit 31108 is a single mounting bracket to fit a Rhino-Rack Heavy Duty or Aero Bar.


This bracket is recommended on a three bar Rhino roof rack system.

$36.00

Rhino Luggage Bag

LBL

The Rhino luggage bag is the perfect accessory to complement your Luggage tray or steel mesh basket.


Designed for harsh Australian conditions, this bag will get your gear to your destination hassle free.


Features Include


Heavy Duty Stitching


Lockable Heavy Duty Zipper with protective Velcro Flap


Extra Heavy Duty UPVC, Abrasion resistant base


Extra Strong Compression straps with Heavy Duty Buckle


Dimensions: 1500mm (L) x 1100mm (W) x 300mm (H)

$329.00

Rhino Luggage Bag

LBM

The Rhino luggage bag is the perfect accessory to complement your Luggage tray or steel mesh basket.


Designed for harsh Australian conditions, this bag will get your gear to your destination hassle free.


Features Include


Heavy Duty Stitching


Lockable Heavy Duty Zipper with protective Velcro Flap


Extra Heavy Duty UPVC, Abrasion resistant base


Extra Strong Compression straps with Heavy Duty Buckle


Dimensions: 1200mm (L) x 960mm (W) x 300mm (H)

$289.00

Rhino Luggage Bag

LBS

The Rhino luggage bag is the perfect accessory to complement your luggage tray or steel mesh basket.


Designed for harsh Australian conditions, this bag will get your gear to your destination hassle free.


Features Include


Heavy Duty Stitching


Lockable Heavy Duty Zipper with protective Velcro Flap


Extra Heavy Duty UPVC, Abrasion resistant base


Extra Strong Compression straps with Heavy Duty Buckle


Dimensions: 1100mm (L) x 800mm (W) x 300mm (H)

$249.00

Rhino J Bolt Short

RJBS

The Rhino J Bolt "Short" is a great 4wd accessory that allows you to safely secure a spare wheel to a Rhino heavy duty cross bar freeing up much needed cabin space and maximizing your carrying capacity.


With Easy to use the J Bolt works by hooking around the underside of a heavy duty cross bar the bolt is then feed up through the wheel stud hole and fastened.


The cross bars will need to be adjusted to a close proximity allowing a suitable width to to rest the wheel on.

$21.00

Sportz Eye Bolts

S604

Made from Galvanised metals, and sold as a pair, the S604 is a perfect tie off point that can be mounted to the Rhino Sportz and Rhino Aero bars.

$19.00

Spacer Blocks for Heavy Duty Bar

LHSPAIR

The LHSPAIR spacer blocks are only compatible with Heavy Duty cross bars.

$12.00

Conduit Clamp Set

BC2

The BC2 Conduit clamp set will adapt 100mm conduit to the Rhino Heavy Duty Bar.


Comes with 2 clamps and allows for mounting of the conduit above or below the Rhino Heavy Duty Bar.

$36.00

Spacer Blocks for Aero Bar

LHS-A1PAIR

The LHS-A1PAIR Spacer Blocks are only compatible with Aero cross bars.

$12.00

Key Locks suit Rhino 2500 Multi Fit Roof Rack

RLK-LOCK-4

The RLK-LOCK-4 is a set of 4 key Locks will suit the Rhino 2500 Multi Fit Roof Racks.


They will lock your roof racks to the vehicle to prevent theft.

$20.00

U Bolts

S280

When mounting a mesh basket or roof box to a Rhino Sportz or Aero bar, we recommend a S280.


This is a set of 4 rounded u bolts to suit the Sportz bar, measuring 65mm x 100mm.


They come with black powder coated plates and 8 wing nuts and washers to secure the plates down.

$35.00

Ratchet

SRG

When needing to secure your load, the SRG is the ideal part.


By locating into the channel of a Rhino Sportz or Rhino Aero bar, the Stainless Steel ratchet grab, which comes with a 2 meter long black strap made with high grade webbing and a metal hook on the end, is the perfect solution for securing your load.


Sold individually.


NOTE: Suggested to be used with Sportz Eye Bolts S604

$32.00

Light Beacon Mounting Plate

RBP

The light beacon Mounting Plate is designed to adapt standard beacon lights to the Rhino Heavy Duty Bar.

$26.00

Spacer Blocks for Heavy Duty Bar

LHS2PAIR

The LHS2PAIR Spacer Blocks are only compatible with Heavy Duty cross bars.

$24.00

Pipe Clamps

SPC6

Made from galvanised steel, the 6” (150mm) pipe clamps are sold as a pair.


They fit into the top channel on a Rhino Sportz and Rhino Aero bar, and secure with an m8 bolt and nyloc nut.

$30.00

Ratchet

RRG2

With twin hooks and 4-meter straps, the RRG2 is reccommended to be used when securing large items down like ladders, timber or even a small boat.


Made from high-grade webbing, the straps are bright yellow.


The Ratchet is quick and effective when you need to secure your load easily.

$40.00

Pipe Clamps

RPC4

Made from galvanised steel, the 4” (100mm) pipe clamps are sold as a pair.


They fit into the top channel on a Rhino Heavy Duty cross bar, and secure with an m8 bolt and nyloc nut.

$28.00

High Lift Jack Holder

RJHB

The Rhino High Lift Jack holder is a great accessory that lets you carry your high lift jack safely and securely It mounts directly to the Rhino Heavy Duty Cross bar saving you precious vehicle storage space.


The jack holder suits most hi-lift jacks and is designed to allow a padlock to be used, if required.

$57.00

Shovel Holder

RSHB

When you're travelling around Australia, and you need to carry a shovel, the best way is to use the RSHB.


Sold as a pair, these brackets are made from strong glass reinforced nylon and come with an adaptor to suit either Rhino Heavy Duty or Rhino Sportz and Aero bar.


The RSHB also comes with a special Allen Key to adjust the Holder, and the shovel is held on by a large screw knob located on one side of the holder.

$43.00

Spare Wheel Holder

RSWH

The RSWH is the ideal method of securing your spare wheel to your Rhino Alloy Tray.


This unit is easy to fit using a 1-piece clamping unit, and all parts are replaceable.


Made from a strong ultra-light material and coming with a 3 yr warranty, this is the perfect 4wd accessory.

$93.00

Wheel Step

RWS

The safe and effective way to load and unload your roof racks, luggage basket, luggage box or alloy tray on your 4wd.


The Rhino Wheel Step gives you quick and easy access to your vehicles roof area for the loading or unloading of your luggage and camping gear.


The Wheel Steps’ steel construction is safe and sturdy. Simply unfolds and hangs over your vehicles wheel, then quickly folds flat to easily store in your vehicle, ready to use.


Adjustable fittings for 4 different height settings and 3 different wheel widths.

$87.00

Tie Down

S331-BK

Measuring approx 3-metres and sold as a pair, the S331 is a black tie down strap with red printing on it.


They come with a cam loc buckle and have a load capacity of 310kgs.

$16.00

Ratchet

RRG1

With twin hooks and 3-meter straps, the RRG1 is reccommended to be used when securing large items down like ladders, timber or even a small boat.


Made from high-grade webbing, the straps are a bright yellow.


The Ratchet is quick and effective when you need to secure your load easily.

$22.00

Pipe Clamps

RPC6

Made from galvanised steel, the 6” (150mm) pipe clamps are sold as a pair.


They fit into the top channel on a Rhino Heavy Duty cross bar, and secure with an m8 bolt and nyloc nut.


They are the only clamps available for 150mm conduit.

$32.00

Beacon Plate

BP

Ideal for securely attaching beacons/flashing light units to your roof racks.

$34.50

Mounting Base

MPH

Slides into the crossbar channel and can be used for a variety of mounting application.

$47.50

Pipe Clamp 150mm

PC150

Pipe clamp designed to rigidly attach 150mm tube to your racks.

$41.00

Pipe Clamp 100mm

PC100

Pipe clamp designed to rigidly attach 100mm tube to your racks.

$38.00

Mounting Base

MP

Slides into the crossbar channel and can be used for a variety of mounting application.

$23.00

Ladder Roller

LRA

Can be used for simplified ladder loading, along with awkward or heavy loads.

$79.50

Ladder Pegs 180mm

LPP

These pegs are ideal for supporting ladders and similar loads and come complete with a pair of mini tie downs, eye bolts can be screwed to the top of the pegs. 180 mm

$68.00

Eye Bolt

EB

A convenient anchor point to secure Tie down Straps or Ratchet Tie Down Hooks.


Also able to be screwed into the top of laddeer pegs.

$14.50

Aerial Mounting Kit

AMK

For attaching a range of accessories including aerials, light and signage.

$22.00

Aerial Mounting Kit

RCAMK

For attaching a range of accessories including aerials, light and signage.

$21.00

Ladder Pegs 100m

LP

These pegs are ideal for supporting ladders and similar loads and come complete with a pair of mini tie downs, eye bolts can be screwed to the top of the pegs. 100 mm

$63.50

Ladder Roller 700mm

RCLRA-07

Can be used for siplified ladder loading, along with awkward or heavy loads. 700 mm wide

$75.50

ToyLoc

TL1020

Toylok™ features a cut resistant steel cable and steel welded case, giving you peace of mind that your possessions are as secure as possible.


The flexible cable extends up to 5 ½ metres giving you plenty of length to weave through your goods and is covered in a tough PVC coating to prevent scratching.


ToyLok™ can be secured to nearly any surface, whether bolted to a ute, caravan, trailer, garage or workshop.


LOCK IT, LOOP IT, LEAVE IT!


Know that while sleeping, working or at play that your valuables are protected from theft with ToyLok™!

$199.00

Universal Load Holders

RCLSH

Load Support Holder with tough nylon, glass reinforced construction, built-in buffer strip to avoid marking fragile loads and tie down facility built into body.


Suitable for use with ROLA Alloy Luggage Tray, ROLA Heavy Duty bars and Rhino Heavy duty

$25.00

Pipe Clamp Ladder rail kit

RCCM2

Attaches 100m conduit carrier to side of ladder rack system. 1 pair.

$30.00

Retainer Strap

RCRES

Attaches to the underside of the bar and holds the ladder tight with a cam lock tie down.

$47.50

Extention Ladder Holder

RCCSL3

Designed for the protection of your expensive ladders, nylon inserts cover full surface of the Ladder Slide for maximum protection.


The Ladder roller utilises a specialty centre with correspondig rubber extruded sleeve for maximum protection of your ladders and guaranteed to always roll.


3 metre ladder rails for extension Ladders


Inc. roller, retaining strap and fittings for tree bars

$454.00

Step Ladder Holder

RCCSL

Designed for the protection of your expensive ladders, nylon inserts cover full surface of the Ladder Slide for maximum protection.


The Ladder roller utilises a specialty centre with correspondig rubber extruded sleeve for maximum protection of your ladders and guaranteed to always roll.


2.6 metre ladder rails for Step Ladders


Inc. roller, retaining strap and fittings for tree bars

$454.00

Conduit Carrier 100mm x 3.1m

RCCC1

Conduit holder manufactured to Telstra specifications, including reinforce end caps and safety wires.


Attaches to the side of the ladder rack system and supports the conduit during installation without the need for a second person.


Also availabe as an on bar accessory.

$92.00

Conduit Carrier 100mm x 4.6m

RCCC2

Conduit holder manufactured to Telstra specifications, including reinforce end caps and safety wires.


Attaches to the side of the ladder rack system and supports the conduit duir installation without the need for a second person.


Also availabe as an on bar accessory.

$128.00

Universal Load Holders

LSHU

Load Support Holder with tough nylon, glass reinforced construction, built-in buffer strip to avoid marking fragile loads and tie down facility built into body.


Suitable for use with ROLA Universal Cross bars, Thule Aero bars and other racks with Universal T slot

$25.00

Pipe Clamp 100mm 3 Bars

RCPC100-3

Pipe clamp designed to rigidly attach 100 mm tube to your racks. 3 Bars

$43.50

Beacon Plate

RCBP

Ideal for securely attaching beacons/flashing light units to your roof racks.

$34.50

Moulded Ladder Pegs

MLP

Clamps around cross bar and has a swivel peg that can rotate so that contoured loads can be accomodated.


Also used as a load holder.

$23.00

Pipe Clamp 150mm

RCPC150

Pipe clamp designed to rigidly attach 150 mm tube to your racks. 2 Bars

$41.00

Ladder Pegs 180mm

RCLPP

These pegs are ideal for supporting ladders and similar loads and come complete with a pair of mini tie downs, eye bolts can be screwed to the top of the pegs. 180 mm

$39.50

Ladder Pegs 125mm

RCLP

These pegs are ideal for supporting ladders and similar loads and come complete with a pair of mini tie downs, eye bolts can be screwed to the top of the pegs. 100 mm

$36.50

Pipe Clamp 100mm 2 Bars

RCPC100-2

Pipe clamp designed to rigidly attach 100 mm tube to your racks. 2 Bars

$30.00

Moulded Ladder Peg

RCMLP

Clamps around cross bar and has a swivel peg that can rotate so that contoured loads can be accomodated.


Also used as a load holder.

$23.00

Ratchet Tie Down

RCTDR

Heavy duty ratchet mechanism with 3500 mm strap and metal hook.

$45.00

Ladder Roller 500mm

RCLRA-05

Can be used for simplified ladder loading, along with awkward or heavy loads. 500 mm wide.

$62.00

Eye Bolt

RCEB

A convenient anchor point to secure tie down straps or ratchet tie down hooks.


Also able to be screwed into the top of laddeer pegs.

$13.50

Pipe Clamp 100mm 4 Bars

RCPC100-4

Pipe clamp designed to rigidly attach 100 mm tube to your racks. 4 Bars

$60.00